Some useful tips by our farmers
Store smartly
Stack bales on their ends to touch the ground, preventing misshaping. Avoid piling low DM bales too high to prevent film issues. Store away from trees to avoid bird damage, and promptly remove them from the field after wrapping.
Stretchfilm
Technical information
Wrap early, wrap right
Wrap your bales within two hours to keep the nutrients intact and maintain harvest quality. Use the correct film with at least 6 layers, ensuring a 50% overlap, controlling stretch, and keeping rollers clean.
Go for higher dry matter
Choose bales with higher Dry Matter (DM) for better crop fermentation, shape retention, and effective storage.
Shape matters for wrapping success
Mind the size and shape of your bales! If they’re too big or misshapen, it might affect the wrapping process. Be aware of these factors during baling.
Load More
Get in the know.
Check out our product facts!
Silage quality can be negatively affected by harvesting after optimal maturity, baling and wrapping with either more or less than the target moisture content, or from field contamination with soil and other organic matter entering the silage. In order to properly seal and eliminate oxygen permeation for round bale silage and ensure there are no ‘shoulders’ or poorly shaped bales, make sure to use TamaNet+ Edge to Edge netwrap to ensure full-width bale coverage.
Film layers opening can be attributed to various factors, including the low cling properties of the film, insufficient layers applied, crop, netwrap, or twine protruding between layers, and an uneven film overlap on the bale.
To overcome this, ensure proper wrapper calibration to optimize the application of film. You must also apply a sufficient number of turns based on bale size to achieve effective coverage, and avoid using oversized or misshapen bales, as this helps maintain a uniform film application and prevents issues with overlap on the bale.
Film splitting presents challenges during the wrapping process, often caused by using damaged film, applying insufficient layers, encountering film over-stretch due to poor-quality film or over-tacked pre-stretch rollers.
To address these issues, it is recommended to use high-quality film for wrapping, ensuring a robust and durable material. Applying a sufficient number of film layers enhances the integrity of the wrapping. Maintaining proper turntable speeds is crucial to prevent issues related to film over-stretch. Additionally, avoiding over-tacking pre-stretch rollers is essential to prevent excessive film 'neck-down,' leading to reduced film overlap and potential splitting. Be sure to clean the pre-stretching unit often.
Ejecting wrapped bales on coarse stubble compromises the integrity of the silage bale and may lead to quality deterioration. To address this concern, it’s recommended to transport the bales from the field to a smooth, flat surface for secure wrapping.
Load More